Process Engineer Vacancy JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic professional candidates to join our team as Process Engineer position below.

Duties & Responsibilities:
Perform basic process simulation and equipment design; Perform hydraulic study and relief load calculations; Prepare Process Flow Diagram, Piping & Instrument Diagram and other engineering drawings/data sheets; Execute HAZOP and other plant safety related studies; Assist in site check and other construction related activities; and a wide range of other engineering activities depending on project requirement.

Requirements:

• Bachelor s degree in Chemical Engineering.
• Fresh graduates are encouraged to apply.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in Microsoft Office Suite.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail

Senior Process Engineer Career JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic professional candidates to join our team as Senior Process Engineer position below.

Responsible for the execution of process design involving the preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities:

• To lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• To generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals etc to comply clients requirement.
• To carry out process simulations and develop heat and material balances.
• To carry out process design for reactors, columns, drums, heat exchangers, tanks etc and develop the respective process datasheets.
• To carry out hydraulic design for pumps, compressors, blowers etc and develop the respective process datasheets.
• To conduct or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews etc.
• To check design outputs, datasheets and drawings prepared by process engineers to ensure accuracy and completeness to design requirements and concepts.
• To support the construction team during construction phase and carry out site checks.
• To support the commissioning team during plant or unit startup.
• To coordinate with project team and other department engineers to facilitate the smooth progress of the engineering work.
• Performs other functions that may be assigned by the Department Manager

Requirements:

• Bachelor s degree in Chemical Engineering.
• Minimum of five (5) years in the field of process engineering design and construction experience
• In Oil & Gas, Petrochemical, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office Suite.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.E-mail

Senior Piping Stress Analysis Engineer Job JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic professional candidates to join our team as Senior Piping Stress Analysis Engineer position below.

To act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for piping thermal stress/vibration analysis, and preparation of piping layout. Has the technical responsibility for interpreting and evaluating stress/vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping mechanical analysis and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare specification for mechanical analysis, piping support standard drawings, and execution procedures for mechanical stress analysis.
• To develop piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors, and reactors, preferably in 3D CAD format.
• To check and review thermal stress/vibration analysis data inputs/output, piping layout, piping information prepared by engineers, and interprets and evaluates stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to piping Key person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommends preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

• Bachelor s Degree in Mechanical Engineering
• Minimum of eight (8) years in the field of piping engineering involving detailed design, stress evaluation, 3D modeling and review, and three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software.
• Basic knowledge of AutoCAD/Cad Pipe and Microstation 2D CAD
• Basic knowledge of 3D modeling thru PDS/SP3D or related software
• Knowledge of stress/vibration operation and analysis
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyze and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail

Senior Piping Material Engineer Vacant Position JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic professional candidates to join our team as Senior Piping Material Engineer position below.

Acts as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of piping material specifications and requisitions, and piping vendor quotation evaluations and verifications. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification and regulation.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping engineering activities with other Lead Engineers and disciplines of the project as directed by Piping Supervisor.
• To prepare piping material requirement summary, piping class summary table, basic piping material specification and execution procedure for piping material handling.
• To conduct mechanical calculations e.g. Pipe wall thickness and branch reinforcement strength calculation etc.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review the SPRD/PDS database based on the relevant piping material specification and datasheets.
• To perform the function inherent to piping key person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counselling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommends preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer
• To carry out engineering support work during the construction phase of the project.

Requirements:

• Bachelor s degree in Mechanical Engineering or Chemical Engineering.
• Minimum of eight (8) years in the field of piping engineering involving piping material specification and requisition preparation or detailed design, three (3) years of which in a supervisory capacity.
• In Oil & Gas, Petrochemical, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Basic Knowledge of AutoCAD/Cad Pipe and Micro station 2D CAD.
• Basic knowledge of 3D Modeling thru PDS/SP3D or related software.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail

Senior Civil Engineer Vacancy JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic proffesional candidates to join our team as Senior Civil Engineer position below.

Responsibilities:
Responsible for the execution of civil design involving the preparation of calculations and review of civil design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities:

• To lead young Engineer team carry out civil and structural engineering jobs in front end engineering design, detail engineering design.
• To assist discipline manager allot project civil portion manpower.
• To generate project specification, design philosophy, calculation template to comply clients requirement.
• Civil project team man hour control, schedule control
• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On the average, a Civil Engineer II produces 3 simple foundation calculation sheets a day or 1 structural calculation sheet a week.
• To review & check three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.
• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.
• Usually prepares anchor bolt list and setting bolt list for client s procurement purposes ensuring at least ± 10% safety factor and meeting client requirements.
• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.
• May act as Assistant Key Person for small projects or NIDC projects.
• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.
• Performs other functions that may be assigned by the Department Manager

Requirements:

• Bachelor s degree in Civil Engineering.
• Minimum of eight (10) years in the field of years plant engineering design and construction experience
• In Oil & Gas, Petrochemical, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Familiar with the software Staad Pro.
• Basic knowledge on AutoCad and Micro station.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail

Senior Engineer Career JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic proffesional candidates to join our team as Senior Engineer position.

Responsibilities:

Brief work description:
The position requires a matured person who has consistent working experience in mechanical engineering in Engineering department and has consistently handled engineering activities of rotating/package equipment for EPC nature of projects with sound technical back ground and responsibilities in selection, conduct basic design, check client specifications, reviewing and controlling of detail engineering of vendor s packages, reviewing vendor s factory and field acceptance test packages and ensure equipment performance to the given specification at site.

Nature of job: FEED, Detail Engineering, EPC or EPCm projects

Detail of work to be handled:

• Preparation of all engineering deliverables such as:
• Mechanical data sheets
• technical specifications
• Tie-in, battery limit definitions for piping, instrument, electrical interfaces
• Space control and management drawings/documents
• Requisitions, Clarifications, technical bid evaluations
• Equipment modification specifications
• Bill of materials for construction scope of work and other construction required data for site work
• Any other related documents required for completion of work/assignments
• Check and release all error free deliverables to project/client
• Ensure design/deliverables are in conformance Code, standards and meet project specification requirements
• Checking of vendor documents for assuring compliance
• Smooth working with team of engineers for transfer of information, knowledge, training/mentoring and resolving issues etc
• Control of all interface matters of rotating equipment system and ensure smooth exchange data/information matters between various disciplines
• Attend site work as required to complete engineering work, collect data, trouble shooting at site, performance check or handover of equipment/packages
• Compile lesson learned data base, procedures, internal working standards, check lists etc to improve work procedures, standards for implementing a systematic work culture
• Control of work progress and deliverable issue schedules of discipline work
• Support project for tender activities (write-up of technical proposals, estimate of man-hours, schedules)
• Status and work progress reporting and control of rework and man-hours
• Keeping records, files up to date and maintain library for the job handled

Requirements:

Qualifications:

• Bachelor s degree in Mechanical Engineering preferred.
• Engineers with Diploma qualification coupled with extraordinary experience may be considered

Experience:

• 8 to 12 years in Oil & Gas, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail

Senior Static Engineer Job JGC Oil and Gas

The JGC Group consists of the main company, which provides a wide range of services in the planning, design engineering, construction, and commissioning of various kinds of plants and facilities, and another 41 subsidiary, and 32 affiliated, companies in Japan and aboard. The activities of the JGC Group include the equipment procurement services, and the provision of the inspection and maintenance services incident to the construction and running of such plants and facilities, the manufacture and sale of catalysts and other chemical products, and IT-related services.

Currently, we are looking for young energetic and dynamic proffesional candidates to join our team as Senior Static Engineer position.

Qualifications:
Degree
(Diploma engineers with extraordinary experience may be considered)

Experience:
7 years
(In Oil & Gas, Petrochemical, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department)

Nature of job: FEED, Detail Engineering, EPC or EPCm projects

Detail of work to be handled:

• Preparation of all engineering deliverable such as
1. Mechanical data sheet, design calculations and engineering drawings.
2. Technical specifications and data sheets
3. Requisitions, clarifications, technical bid evaluations
4. Equipment modification specifications
5. Construction required engineering information/documents
6. Any other related documents required for completion of work/assignments
• Check and release all error free deliverable to project/client
• Ensure design/deliverable are in conformance Code, standards and meet project specification requirements
• Checking of vendor documents for assuring compliance
• Smooth working with team of engineers for transfer of information, knowledge and resolving issues etc
• Interdiscipline co-ordinations for smooth exchange of project, vendor and client information for error free products
• Attend site work as needed to complete engineering work, collect data, trouble shooting at site, performance check or handover of equipment
• Compile lesson learned data base, procedures, internal working standards, check lists etc to improve work procedures, standards for implementing a systematic work culture
• Estimation of man-hours, deliverable and schedules
• Status and work progress reporting and control of rework and man-hours
• Keeping records, files up to date and maintain library for the job handled

Please send your detail CV and application at the link address below not later than June 18, 2012 after this advertisement and please put "LKITnews.com website" as reference at your application letter.
E-mail